Publications (2020-2024)

2024

Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).

2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).

• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).



2024

• Ortiz-Domínguez M, Mourad Keddam, Morales-Robles Á J, Characterization and boron diffusion modelling on the AISI H13 Steel, Journal of Mining and Metallurgy Section B: Metallurgy.,  Vol.  60 (3) (2024) ,pp. 353 – 365


• Sari A, Keddam M, A. Ouanezar, A. Malki, Investigation on structural and magnetic properties of the mechanosynthesized Fe-doped ZrO2-15mol% Y2O3, Processing and Application of Ceramics , Vol. 18, No 4, 2024; pp. 386–3945 ( 2024).


• Boumaali B, Keddam M, Kinetic modeling of ultra-fast boriding of AISI 1045 steel and phase homogenization, Protection of Metals and Physical Chemistry of Surface,  Vol. 60, pp. 282–290, (2024).


• KHATER M A, MEBAREK B, BOUAZIZ S A, KEDDAM M, EL GUERRI Y, Kinetics Simulation of TiB₂ Layers on the Titanium alloy (Ti6Al4V) obtained by Liquid Boriding Process, Kovove Materialy, Vol. 62, pp. 245-252 (2024).


• Orihel P, Ptačinová J, Gogola P, Keddam M, Jurči P, Pack-boriding of Sleipner steel: Microstructure analysis and kinetics modelling, Materials Testing, vol. 66, no. 1, 2024, pp. 43-55.


• Türkmen İ and Keddam M, Boronizing of Monel K500 Alloy: Microstructural Characterization and Modelling of Boron Diffusion, Materials Characterization, Vol.213, 2024,  113995.


• Ortiz–Domínguez M, Keddam M,  Fe₂B layer growth kinetics on ASTM A307 steel with two diffusion models, Materials Testing , vol. 66, no. 3, 2024, pp. 410-421.


• Ortiz-Domínguez M, Keddam M, Diffusion Kinetics and Characterization of Fe2B Coatings Grown Thermochemically on Steel ASTM A709, Metal Science and Heat Treatment, vol. 65, pp.538–546 (2024).


• El Guerri Y, MEBAREK B, KEDDAM M, Confrontation of linear versus nonlinear approch in Fe₂B boride layer thickness predictions,  Materials Protection,  Vol. 65,  No. 1, pp.97-109 (2024).


• HADJADJ N, MEBAREK B, El Guerri Y, KEDDAM M, Dybkov model and integral method for the estimation of boron diffusion in the FeB/Fe₂B bilayer on AISI 316 steel ,  Materials Protection, Vol. 64, No.2, pp. 220 – 235 (2024).


• Sofiane Latreche, Boutarek N, Bencherifa I, Messaoud F, Trari M Electrochemical Performance of NiAl Activated Cathode for Green Hydrogen Production. Chinese Journal of Chemical Engineering. August 2024


• Djemmah S, Voué M, Madi Y, Allou D, Haddad A, Bouchafaa H, “Investigation of microstructural and electrochemical behavior of chromized-doped layers with variant magnesium concentrations”, Academy Proceedings in Engineering sciences, Volume 49, article number 243, (2024), Springer. DOI: 10.1007/s12046-024-02573-1



2023

• Yacoubi K., Boutarek N. and Jahazi M. Effect of Molybdenum and Silicon on Microstructural Evolution and Compressive Behaviour of Titanium Aluminide Based Alloys. J Mater Sci Nanomater, Vol 7(2),(2023).



2022

• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Ziane, F., Amokrane, S., Murillo, R., Ouassel, S., Nibou, D. Recovery of synthetic copper ions by activated carbon from an industrial plastic PVC waste: Equilibrium, dynamic, kinetic and thermodynamic studies. Chemical Physics Letters, 805, 139949, (2022).


• Lakreb, N., Sen, U., Bezzazi, B. Pereira, H>The physicomechanical and thermal properties of Algerian Aleppo pine (Pinus halepensis) wood as a component of sandwich panels. iForest-Biogeosciences and Forestry, 15(2), 106, (2022).


• Lakreb, N., Şen, U., Beddiar, A. Properties of eco-friendly mortars produced by partial cement replacement with waste cork particles: a feasibility study. Biomass Conv. Bioref. (2022).


• Mansour, S., Keddam, M., Boumaali, B. Prediction models for the kinetics of iron boride layers on AISI 316L steel. Koroze a Ochrana Materiálu, 66(1), 40-49, (2022).


• Günen, A., Açıkgöz, H. H., Keddam, M., Karahan, I. H. Characterizations and Kinetics of Refractory Niobium Carbide Coatings on AISI D3 Steel. Journal of Materials Engineering and Performance, (32), 8972–8980, (2023).


• Makuch, N., Kulka, M., Keddam, M., Piasecki, A. Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials, 16(1), (2022).


• Ucar, N., Ekinci, C. İ. H. A. N., Calik, A., Keddam, M. Special Features of the Kinetics of Boriding of Binary Fe–Ni Alloys. Metal Science and Heat Treatment, 64, 176-182, (2022).


• Gunen, A., Keddam, M., Sunbul, S. E., Icin, K., Doleker, K. M., Gok, M. S., Erdogan, A. Powder-pack boronizing of CoCrFeNiAl0. 5Nb0. 5 HEA: Modeling of kinetics, microstructural, mechanical and tribological characterizations. Journal of Alloys and Compounds,929, 167310, (2022).


• Benmessaoud, A., Nibou, D., Mekatel, E. H., & Amokrane, S. A comparative study of the linear and non-linear methods for determination of the optimum equilibrium isotherm for adsorption of Pb²⁺ ions onto Algerian treated clay. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 39(4), 153-171, (2020).


• Dahdouh, N., Amokrane, S., Murillo, R., Mekatel, E., Nibou, D. Removal of methylene blue and basic yellow 28 dyes from aqueous solutions using sulphonated waste poly methyl methacrylate. Journal of Polymers and the Environment, 28(1), 271-283, (2020).


• Elhadj, M., Amokrane, S., Mohamed, T., Djawad, F., Asma, A., Nibou, D. Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: equilibrium, isotherms, kinetics, and thermodynamic studies. Separation Science and Technology, 55(5), 867-885, (2020).


• Anas Boussaa, S., Zaourar-Boutarek, N. and Kefaifi, A. Characterization and experimental design application for Algerian silica sand enrichment. Arabian Journal of Geosciences, 13, 472, (2020).


• Laroui, W., Chegroune, R., Talaş, Ş., Keddam, M., Badji, R. Microstructural and Mechanical Characterization of Shielded Metal Arc Welded Dual Phase Steel Joints. In Annales de Chimie-Science des Matériaux 44(6), 381-386, (2020).


• Kouba, R., Rayane, K., Keddam, M. Thermodynamic reassessment of Fe-N and Fe-NC systems. Calphad, 71, 102197, (2020).


• Keddam, M., Kulka, M. Simulation of the Growth Kinetics of γ′-Nitride Layers on Armco Iron by the Integral Method. Metal Science and Heat Treatment, 62(7), 529-533, (2020).


• Mebarek, B., Keddam, M. Fuzzy logic approach for modelling the formation kinetics of Fe₂B layer. International Journal of Computational Materials Science and Surface Engineering, 9(2), 147-156, (2020).


• Keddam, M., Kulka, M. Mean diffusion coefficient method in studying armco iron boriding kinetics. Metal Science and Heat Treatment, 62(5), 326-330, (2020).